Contact Acronis recovery methods and differences
I did the recovery test in two ways.
And I was curious.
Let me explain with an example.
When recovering from physical machine A to physical machine B.
A device's usage capacity is 30GB, and the actual maximum disk capacity is 100GB.
And the actual maximum disk capacity of device B is 80GB.
In this case, because the maximum capacity of device B is smaller than that of device A, recovery using the recovery image was not possible.
When recovering from physical machine A to virtual machine C.
As expected, the usage capacity of device A is 30GB, and the actual maximum disk capacity is 100GB.
And the maximum disk capacity of the C virtual machine is set to 80GB.
After that, the recovery was performed and the recovery was successful.
The only difference between B and C equipment is that of real physical equipment and virtual equipment.
However, C succeeded in recovery even though the maximum capacity was less than A, and B failed.
Are there any recovery conditions I don't know?
What difference is causing this effect?