Feedback on Acronis Forum
Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
I will test uploading another image here.
Image date: 14 September 2018
Image title: Panorama road between Waltensburg / Vuorz and Breil/Brigels, Canton of Grisons, Switzerland
Author: Agnes Monkelbaan
Source: https://commons.wikimedia.org/wiki/File:Panoramaweg_tussen_Waltensburg-…
I uploaded the image above in about 10 seconds. That is very slow, but at least it worked at the time of writing.
For what it's worth these are the steps I normally take when uploading.
1. I click inside the reply box/editor at the bottom of the page.
2. I click on the icon for "Imce File Manager" in the toolbar.
3. I click on the "Upload" button and then the "Add file" button.
4. I select a file on my computer and click on "Open" in the "File Upload" dialog (file picker).
5. I click on the "Select" button. Then begins the waiting process and my image is embedded in the forum post after a few seconds.
If someone from Acronis is following this thread, please update us on what actions you're taking to sort this out.
As I was writing the previous post I noticed in the URL that I'm viewing page 2.
https://forum.acronis.com/forum/forum-administration/feedback-acronis-forum?page=2
But the current pagination number is 3.
So we have a minor bug here.
Another upload test...
Image date: 20 July 2019
Image title: Dingle Lighthouse, at the entrance of Dingle Bay
Author: Superbass
Source: https://commons.wikimedia.org/wiki/File:2019-07-20-Dingle_Lighthouse-06…
A lot of the delay appears to be related to Yandex Metrica. But that's not all, the forum server is so slow that my browser tags its POST and GET requests with little turtles (to indicate "turtle slow" responses). If I hover over the little turtle I get a tool tip message saying that the recommended time is 500 ms. You can also see that it took 6.98 seconds total to load upload and load that forum post. And as you can see the console is screaming about all sort of warnings and a few errors.
Editing my previous post results in an incredible delay of almost 13 seconds. That's more than 3 times the recommended half second maximum value.
Time is 15:13pm UK Winter time.
Samir, sorry but you are missing the key point here! I have no issues with using the Imce File Manager to embed images within the text input box, as you have been doing. I and others cannot use the File > Add a new file > Upload option!
will this post? none of my comments or new posts are appearing! They show in my "my account" page, but do not appear in the threads, or in searches of the forum. Please can someone help?!
Steve Smith wrote:Time is 15:13pm UK Winter time.
Samir, sorry but you are missing the key point here! I have no issues with using the Imce File Manager to embed images within the text input box, as you have been doing. I and others cannot use the File > Add a new file > Upload option!
Thanks Steve! Yes, I totally missed the point. Yes, I can confirm I have the same issue.
Using Firefox 83.0b8 at the moment. I will try a few different browsers shortly.
One thing I noticed just recently as I was testing the upload feature (using Imce File Manager) is that all my recent files now have a long tail or appendix at the end of the file name, in order to make them uniquely identifiable I suppose.
For example, the original file name of the image you see above: testfile.png
Its new name within Imce File Manager is now: testfile_455577dc31c593e9a7f332382f48d507.png
This is not how it worked just a few days ago. It seems a bit odd... someone may be working in the background to improve the system (speculation).
OK, I tested this now in Internet Explorer 11.572.19041.0 and Google Chrome 86.0.4240.183. It's not working in either one.
Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
Steve Smith wrote:Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
+1
Still not possible to upload any files again today!
Add a new file: "The file could not be uploaded"
IMCE Tool: "The file is 114,2 KB which would exceed your disk quota of 500 MB"
G. Uphoff wrote:Still not possible to upload any files again today!
Add a new file: "The file could not be uploaded"
IMCE Tool: "The file is 114,2 KB which would exceed your disk quota of 500 MB"
I suspect that the issue with the IMCE tool is that you need to get Ekaterina to increase your disk quota - I had this a few years back and my own quota was increased to 1GB.
The file upload issue is still there again today!!!
Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
Steve Smith wrote:Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
+1
IanL-S wrote:Steve Smith wrote:Still not possible to upload any files again today! This needs to be fixed urgently to allow the forums to work correctly and for the MVP's to help other users!
+1
Still not fixed!
Steve Smith wrote:Back to 'The file could not be uploaded.' error again this evening though the same files could be embedded using the Imce File Manager icon option!!!
_10.jpg){kind=link}
Hello Everyone,
sorry for the delayed response! The issue has been fixed, please check
Thanks Ekaterina, was very frustrating not being able to use this feature!
Add a new file works.
IMCE Tool did not work: "The file is 114,2 KB which would exceed your disk quota of 500 MB"
Per usual, I will do my testing using images from Wikimedia Commons.
"Add a new file" option:
(Image added as a file attachment, not as an embedded image, so there is nothing to render here. Click the link at the bottom of this post to view the image.)
Image date: 17 November 2017
Image title: Paddyfield pipit (Anthus rufulus rufulus), Kanha National Park, MP, India
Author: Charles J Sharp
Source: https://commons.wikimedia.org/wiki/File:Paddyfield_pipit_(Anthus_rufulu…
.jpg){kind=link}
"IMCE File Manager" option (embed):
Image date: 26 August 2017
Image title: View of the Yukon River at Schwatka Lake and the entry to Miles Canyon, Yukon, Canada.
Author: Diego Delso
Source: https://commons.wikimedia.org/wiki/File:Ca%C3%B1%C3%B3n_Miles,_Yuk%C3%B…
All good, all systems go. 👍
The forum is super slow. Every time I click on a button or link it takes like 10 seconds until it does something. Don't have issues like this on other sites so its not my connection that causes the issues.
Mike Koch wrote:The forum is super slow. Every time I click on a button or link it takes like 10 seconds until it does something. Don't have issues like this on other sites so its not my connection that causes the issues.
I saw the same yesterday but it seemed to have cleared up by the later afternoon (UK time) and has been 'normal' response times today so far! I suspect that Acronis have been tinkering with the forum sofware unless they had issues with their servers!
So now all new posts, topics, comments are coming in as above with just :: new comment to distinguish them!
Sorry but this is another backward step in the forum notifications and needs to bring back the actual topic title for where the update is being posted!!!
The incoming email notifications look to have expected topic title information again today but am getting random blank emails again, several yesterday and again today!
The blank emails just have the sender address: noreply@forum.acronis.com but with no subject and no body text etc!
Further strange behaviour this afternoon (UK time) as shown in image below that appeared when I wanted to Save this post but which hid the Save button along with File Upload options.
Had to copy my new text, refresh the web page, then paste it back in again!
Why has the # 33 post numbering been removed from all the forums?
This was always useful when referring back to individual posts in topics and now renders doing so far more difficult than it needs to be! Please put back the post numbers!
+ 1
Ian
It looks as if the separate Acronis True Image 2015 Forum has been closed and the contents moved to the Older Versions forum. However the 2015 Forum is still shown but with 0 topics etc and now the Older Versions forum is so large that any attempt to 'Mark all read' results in a 504 timeout error!
The heading information for the Older Versions forum also needs to be updated to include 2015 or else clarified and simplified!
Discussions related to older versions of Acronis True Image Home - Acronis True Image 2014, True Image 2013 by Acronis, Acronis True Image 2012 Home, Acronis True Image Home 2011, Acronis True Image Home 2010, Acronis True Image Home 2009, Acronis True Image 11 Home, etc.
For example: the above could just say:
Discussions related to Acronis True Image 2015 and older versions!
(2015, 2014, 2013, 2012, 2011, 2010, 2009, 11, 10, 9, 8 & 7).