Help! OptiPlex with M.2 SSD drive will not boot post image!
Hey guys, please help, I'm sure this is an easy fix. I have a Dell OptiPlex 7050 master image, thing is that the system that I used to capture the master image used a normal SATA drive, NOW Dell is shipping me OptiPlex 7050's with M.2 drives.
I am using Win PE boot image from PXE in UEFI mode which is allowing me to deploy the image without error or incident to the system, but these new OptiPlexes with M.2 drives will not boot into windows, giving me "INACCESSIBLE_BOOT_DEVICE". So, do I just need to change the BOOT.INI options or something post deploy of the image?
The picture I've attached shows the Device Information of the Master Image system where you can see that the flash drive on that system was SATA-4, these new systems have the drive in the row beneath, labeled M.2 PCIe SSD-0