127235: Idiodically installed and uninstalled Migrate Easy 7 on Windows 10, can't boot

2 replies [Last post]
Jon Davis
Joined: 2016-11-03
Posts: 2

I idiodically installed Migrate Easy 7 (trial from Download.com) on Windows 10, forgetful that it doesn't support Windows 10. When I uninstalled, I was unable to reboot.

Startup Repair doesn't do anything. It basically says "Startup Repair could not repair."

I've tried running the built-in emergency boot command prompt and ran the commands 

bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

These didn't do anything, and I believe it's becaused bootrec /scanos and bootrec /rebuildbcd both output "Total identified Windows installations: 0"

bcdedit shows an entry for Windows Boot Manager on D:, and an entry for Windows 10 on drive c:. I don't know if the D: entry is wrong; before this point, D: was the CD/DVD drive.

C:\Windows does exist.

What's the resolution path? I need to get back to where I was.

Bobbo_3C0X1's picture
Acronis MVP Volunteer
Joined: 2013-02-27
Posts: 5715

If your disk is legacy/MBR, restore just the MBR parition back from a previous working backup to itself.  If it's UEFI/GPT, just restore the EFI parition back to itself

Hopefully, that's it.  

If not, when I could not fix the bootloader with Bootrec commands or startup repair, I had luck with the attached link.  It basically has you use the Windows recovery advvanced startup command prompt, use diskpart to delete this parition completely (mount volume with a letter and quick format) and then run startup reapair a few times.  I'ts worked on a couple of occassions for me.


There is one thing to be aware of.  It says to format C:.  This is not true.  In his case, the system reserved parition showed up as C in the recovery environment, but you generally have to mount it as a letter of your choosing.  You want to format that letter.  Don't format C: if that is the OS parition in the recovery paritoin.  Other than that, the instructions are spot on. 

Products: True Image, Snap Deploy
System: Motherboard: GA-Z170X-Gaming 3 / CPU: i5 6600K (OC 4.3Ghz) / Memory: 16GB Corsair Vengeance DDR4 (OC 3000 Mhz) / NVMEs: Samsung 950PRO, MyDigital BPX / SSDs: OCZ Vertex 4, PNY XLR8 / HDs: WD Black / OS: Win 10 Pro x64 / NAS: WD MyCloud 4Tb
Jon Davis
Joined: 2016-11-03
Posts: 2

Thx. I did not have a backup. I ended up starting over with Win7 fresh on the new drive and upgrading.

But some kind of educated reply is helpful for teh googles.