Skip to main content

ATI Cloning Fail

Thread needs solution
Beginner
Posts: 1
Comments: 0

Hello, I just purchased a 1TB Sabrent NVMe SSD, and I'm trying to clone my current 250GB Samsung NVMe SSD onto it. Every time I try to complete the clone, I get an error dialogue that says "Disk cloning has failed. See log for details." The log in question is copied below.

I'm using the version of ATI included with Sabrent SSDs (I don't know exactly which version it is, but since the SSD was purchased a few days ago, I'm assuming it's the most recent one), and I have tried both automatic and manual cloning modes, and every combination of parameters available in each mode. I've run 'chkdsk c: /f /r /x' and 'sfc /scannow' multiple times each, both drives are GPT, both have the same sector size, and the target disk is much bigger than the source disk. As far as BIOS settings go, both M.2 slots are in PCIe mode, and secure boot is disabled.

It's also worth mentioning that I've tried booting to the new drive anyway, like a few forum posts have recommended, but the drive is completely empty and unformatted following the failed operation.

Any help would be much appreciated.

1/13/2022 04:12:21:487 PM -08:00 6492 I00000000: -----
1/13/2022 04:12:21:487 PM -08:00 6492 I00000000: ATI Demon started. Version: 25.0.1.38260.
1/13/2022 04:12:21:524 PM -08:00 6492 E00000000: Failed to get incomplete backup plan id: Error 0x108: Failed to retrieve last activity from storage
1/13/2022 04:12:21:527 PM -08:00 6492 I00640002: Operation Clone Disk started.
1/13/2022 04:12:21:527 PM -08:00 6492 I00640000: Operation description: Clone Disk1. Clearing disk
Hard disk:  1
2. Clearing disk
Hard disk:  1
3. Copying and merging partitions
Hard disk:  2, 1 -> 1
Drive letter:  -, - -> -
File system:  FAT32
Volume label:  ESP
Size:  300 MB, 300 MB -> 300 MB

4. Copying and merging partitions
Hard disk:  2, 1 -> 1
Drive letter:  C:, C: -> C:
File system:  NTFS
Volume label:  Main
Size:  221.6 GB, 952.6 GB -> 952.6 GB

5. Copying and merging partitions
Hard disk:  2, 1 -> 1
Drive letter:  -, - -> -
File system:  NTFS
Volume label:  
Size:  822 MB, 823 MB -> 823 MB

6. Copying MBR
Hard disk:  2 -> 1
.
1/13/2022 04:12:21:661 PM -08:00 6492 I000101F8: Pending operation 53 started: 'Clearing disk'.
1/13/2022 04:12:21:665 PM -08:00 6492 I000101F8: Pending operation 53 started: 'Clearing disk'.
1/13/2022 04:12:21:675 PM -08:00 6492 I000101F8: Pending operation 14 started: 'Copying and merging partitions'.
1/13/2022 04:12:26:237 PM -08:00 6492 E000101F6: Error 0x101f6: A format/resize error.
1/13/2022 04:12:26:237 PM -08:00 6492 I000101F8: Pending operation 14 started: 'Copying and merging partitions'.
1/13/2022 04:12:26:237 PM -08:00 6492 E000101F6: Error 0x101f6: A format/resize error.
1/13/2022 04:12:26:238 PM -08:00 6492 I000101F8: Pending operation 14 started: 'Copying and merging partitions'.
1/13/2022 04:12:26:238 PM -08:00 6492 E000101F6: Error 0x101f6: A format/resize error.
1/13/2022 04:12:26:238 PM -08:00 6492 I000101F8: Pending operation 62 started: 'Copying MBR'.
1/13/2022 04:12:26:531 PM -08:00 6492 I001D0000: Fixing operating system bootability.
1/13/2022 04:12:26:535 PM -08:00 6492 I001D0000: The operating system bootability has been fixed.
1/13/2022 04:12:36:615 PM -08:00 6492 E013C0005: Error 0x13c0005: Operation has completed with errors.

0 Users found this helpful
Forum Hero
Posts: 55
Comments: 9163

Have you run chkdsk on the new disk?  Run chkdsk on the new disk as errors there may be in play here.