Skip to main content

MVP ATIPEBuilder driver problem

Thread solved
Beginner
Posts: 1
Comments: 1

Having trouble adding drivers in MVP ATIPEBuilder. The device which needs added driver is SSD-Revodrive 350. Driver is installed and works fine In Acronis 2020 under windows 10. Revodrive recognized in device manager, and cloning performs ok. But in MVP ATIPEBuilder, the driver is NOT recognized. Have placed the two driver- files (sys and inf) in the "customs section", see shot 10 attached. Have not touched the extracted section, but some reference to the revodrive is also there. See shot 11. What have I done wrong here ?

Attachment Size
Screenshot_10.png 9.24 KB
Screenshot_11.png 6.01 KB
1 Users found this helpful
Forum Star
Posts: 46
Comments: 1573

#1

Look in the LOGS folder at the latest log. Does the log show an error for that driver?

You may not have all the files the driver needs. Open the inf file with notepad and copy and paste all the lines under the section headings [SourceDisksFiles] and [SourceDisksNames] here to the forum. That will tell me how the needs to be added.

EDIT:

Okay, I just downloaded your driver. You're missing two files:

OczTrimCoinstaller.dll

OCZTrimFilter.sys

Add those two files to what you already have. You should also make an OCZ folder to hold the 4 driver files under the X64 folder.

Beginner
Posts: 1
Comments: 1

#2

Tried your advise, and bingo, it works !

Just fantastic !

Created, burned and booted the iso, and the Revodrive shows in True Image !!!

True Image 2020 clone works just just fine, source Revodrive, target hdd.

Many thanks for excellent and prompt advise.

Logfile attached  for your information.

regards

erik

Attachment Size
527638-178781.log 8.65 KB
Forum Star
Posts: 46
Comments: 1573

#3

You're welcome. Glad it worked for you.