Cannot boot Recovery CD on UEFI machine
Created Recovery CD using TrueImage 2013 with Plus Pack.
Cannot boot machine with this disk, the machine is UEFI.
What to do?
Boot the computer, press F2 immediately and repeatedly (or whetever key for your machine) to enter BIOS. FInd the way to disable secure boot and to enable legacy boot.
Set up the legacy boot to boot on the DVD. Boot on the recovery CD. DO you operation.
After the operation, reboot, press F2, enable UEFI and secure boot.
Other than buying the Plus Pack anf attempting to make a WinPe based recovery CD, I would suggest contacting Acronsi Support and see if they can make a recovery ISO tailored to your PC. You will need to send them an Acronis system report so that they can see if there are any Linux drivers for your PC.
Thanks, but i am using PlusPack, and it is a complete disaster. Nothing (including the WinPE) seems to work, no matter what I try.
Good thing it is purely a test, and not a live system I am recovering. Otherwise it would really be an ugly situation.
Forget Acronis support, I have never had any success with them. If it does not work out of the box, nothing tech support can do.
Word to the wise: BEWARE UEFI!
Sounds definitely an HP specific driver and setup is the cause here.
I think from an Acronis point of view they will need to have a second level support or developer look into this and only rasising a support ticket can start that process. I believe Acronis are aware of the general UEFI problems so might pick up on this more specific one as well.
You have 2 different things to consider:
a) going past secure boot/UEFI. The only way is to disable secure boot and give priority to legacy boot (eg LEnovo laptop), or disable UEFI and enable legacy boot (eg dell laptop). Then, at least the CD boots
b) making the CD boots all the way to the ATI app. If this doesn't happen, then it is because of a hardware support problem. You have to create a WINPE-based disk using the Plus Pack so that the recovery software supports your hardware.
I actually found another way as well. This is what I wound up doing. I installed the acronis on the PC to be restored. I then ran the program and told it to restore the new image onto the PC. I was able to pick the image up from the USB drive and the system restarted in the workstation mode without having to use the bootable disk. I then was able to restore the new image. These HP PCs have been a real problem there always making things more difficult for us. Thanks again for your help.
I have yet to install ATIH 2013 (quaking in my boots at the prospect...) to replace 2011. However, I did download the latest bootable Media ISO to play with and at least see if IT would work.
It worked on my Windows 7 machine (no surprise, but nice to have that risk retired).
This week we bought a new UEFI breathing Dell laptop loaded with Windows 8. My ADD 11 and ATIH 11 CD's would not boot, but the ATIH 13 downloaded ISO did! So I concluded they made 13 compatible with the UEFI Secure boot nonsense (I had not done anything the the "UEFI Firmware" settings).
Then I booted back into Windows 8 without problems (I didn't learn till later that this could even be a concern...).
So just a piece of data; I've never used the media builder but the downloaded ISO (burned to a CD obviously) will boot on a secure AFAIK UEFI Win 8 platform and I can look at partitions and such.
PS Don't you hate "It works for me!" posts? :)
2013 does not support Windows 8.
Your Acronis personal webpage accounts lists all the Acronis software that you have registered. Any downloads you are eligible for is listed in your account.
The 2013 (as well as other versions) lists the Bootable media ISO file as a separate download. My signature link 9 shows the where and how. Picture 7 insdie that lnk is the iso file.